OPTIMIZATION OF PROCESS PARAMETERS FOR ENHANCING THE PROPERTIES OF BREADFRUIT SEED COAT-REINFORCED LOW-DENSITY POLYETHYLENE COMPOSITE

Authors

  • Paul Chukwulozie Okolie Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria
  • Ezenwa Obiora Nnaemeka Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria
  • Calistus Princewill Odeh Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria
  • Chibuzo Ndubuisi Okoye Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria
  • Madumere Augustine Uzodinma Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria
  • Chima Bright Nwachinemere Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria

Keywords:

Breadfruit seed coat, Pressing parameters, Flame retardancy, Material optimization

Abstract

This study investigates the optimization of process parameters to enhance the properties of breadfruit seed coat-reinforced low-density polyethylene composite ceiling boards. The research focused on assessing the effects of mixing ratio, press temperature, pressure, and press time on key material properties, including water absorption (WA), thermal conductivity (K), flexural strength (FS), and fire performance (FP). Breadfruit seed coats (BSCs) were treated with sodium hydroxide (NaOH) and acetic acid (CH₃COOH) to modify their surface properties before being mixed with kaolin (as a fire retardant) and low-density polyethylene (LDPE) to form composite boards through hydraulic pressing. The study also statistically analyzed and optimized the fabrication parameters using Response Surface Optimal Design (RSOD). The results demonstrated that kaolin content and mixing ratio significantly influenced WA, K, FS, and FP, while press temperature, pressure, and time had varying degrees of impact. The optimized parameters (20% mixing ratio, 180°C press temperature, 15 MPa press pressure, and 10 min press time) gave the optimal moisture resistance, thermal insulation, superior mechanical strength, and fire resistance. The findings highlight the potential of breadfruit seed coat composites as sustainable, cost-effective, and eco-friendly alternatives to conventional ceiling materials. This study contributes to agricultural waste recycling in composite manufacturing, promoting environmental sustainability while meeting modern construction demands

References

Hadi, A., Ibrahim, I., Ang, P., Ern, S., Mohd, & Abdullah, S. (2020). A preliminary study of ceiling boards made from composite material of rice husk, rice husk ash, and waste paper was conducted. Progress in Engineering Application and Technology, 1(1), 104–115. https://doi.org/10.30880/peat.2020.01.01.013.

Kerter Eric, G., & Kallamu Hensley, B. (2017). Analysis of the thermal insulation properties of rice husk ceiling board compared to selected fibre-based ceiling materials used in Yola Metropolis. American Journal of Mechanical and Materials Engineering, 1(4), 83–88. http://www.sciencepublishinggroup.com/j/ajmme.

Madu, O. G., Nwankwojike, B. N., & Ani, O. I. (2018). Optimal design for rice husk-saw dust reinforced polyester ceiling board. American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN : 2320-0936, 7(6), 11–16.

Ohijeagbon, I. O., Bello-Ochende, M. U., Adeleke, A. A., Ikubanni, P. P., Samuel, A. A., Lasode, O. A., & Atoyebi, O. D. (2021). Physico-mechanical properties of cement bonded ceiling board developed from teak and African locust bean tree wood residue. In Materials Today: Proceedings (Vol. 44, pp. 2865–2873. https://doi.org/10.1016/j.matpr.2020.12.1170.

Wahane, A., Sahu, A., Verma, A., & Dewangan, T. (2022). Evaluation of the physical and mechanical properties of composite board by utilizing agricultural waste. In Materials Today: Proceedings (Vol. 84, pp. 16–23). https://doi.org/10.1016/j.matpr.2023.04.142.

Ezenwa, O. N., Obika, E. N., Umembamalu, C., & Nwoye, F. C. (2019). Development of ceiling board using breadfruit seed coat and recycled low density polyethylene. Heliyon, 5(11). https://doi.org/10.1016/j.heliyon.2019.e02712.

Ezenwa, O. N., Obika, E. N., Azaka, O. A., & Nwadike, E. C. (2021). Effect of filler carbonization on agro-waste based ceiling board. Advances in Mechanical Engineering, 13(2). https://doi.org/10.1177/1687814021994403.

Dotun, A. O., Olalekan, O. S., Olugbenga, A. L., & Emmanuel, M. A. (2019). Physical and mechanical properties evaluation of corncob and sawdust cement bonded ceiling boards. International Journal of Engineering Research in Africa, 42, 65–75. https://doi.org/10.4028/www.scientific.net/JERA.42.65.

Anozie, O., & Ifeanyi, N. (2022). Evaluation of the physico-mechanical properties of polyester/corn stalk composite. Poljoprivredna Tehnika, 47(3), 9–22. https://doi.org/10.5937/poljteh2203009o.

Andales, C. M. E., Animas, L. M., Dalit, Ma. J. D., Noriega, C. W. P., & Famadico, J. J. F. (2019). Utilization of bamboo fiber and coconut coir in the production of cement--bonded board. Journal of BIMP-EAGA Regional Development, 5(2), 76–92. https://doi.org/10.51200/jbimpeagard.v5i2.3271.

Ichetaonye, S. I., Ajekwene, K. K., Ulaeto, S. B., Yibowei, M. E., Alosaimi, A. M., Hussein, M. A., & Khan, A. (2021). Sustainable alternative ceiling boards using palm kernel shell (PKS) and balanite shell (BS). Journal of Polymers and the Environment, 29(12), 3878–3886. https://doi.org/10.1007/s10924-021-02156-9.

Madhu, S., Devarajan, Y., & Natrayan, L. (2023). Effective utilization of waste sugarcane bagasse filler-reinforced glass fibre epoxy composites on its mechanical properties - waste to sustainable production. Biomass Conversion and Biorefinery, 13(16), 15111–15118. https://doi.org/10.1007/s13399-023-03792-y.

Achadu, A. A., & Maliki, A. A. A. A. (2020). Production of ceiling board using bio composite of arachis hypogaea and eleas guinessis waste with amylum as adhesive. American Journal of Engineering Research (AJER), 9(6), 169–176.

Amulah, N. C., El-Jummah, A. M., Hammajam, A. A., & Ibrahim, U. (2022). Experimental investigation on the thermal properties of gypsum plaster-rice husk ash composite. Open Journal of Composite Materials, 12(04), 131–138. https://doi.org/10.4236/ojcm.2022.124010.

Wahane, A., Sahu, A., Verma, A., & Dewangan, T. (2022). Evaluation of the physical and mechanical properties of composite board by utilizing agricultural waste. In Materials Today: Proceedings, 84; 16–23. https://doi.org/10.1016/j.matpr.2023.04.142.

Downloads

Published

21-08-2024

Issue

Vol. 4 No. 8 (2024)

Section

Articles