SUSTAINABILITY APPLICATIONS OF CORNCOB ASH FOR COMPOSITE APPLICATIONS: A REVIEW
Corn cob ash
Keywords:
corn cob ash, Sustainability, Polymer composite, Metal compositeAbstract
Environmental awareness about possible adverse effects has substantially expanded, and, consequently, recycling or utilizing agricultural and industrial waste by-products has become an increasingly desirable option for waste disposal. Corncob ash, a byproduct of agricultural processing, has gained attention in recent years for its potential as a sustainable material in composite applications. This review article provides an overview of the utilization of corncob ash in composite materials, focusing on its properties, influence on mechanical properties of composites, and environmental benefits. Additionally, challenges and future directions for the sustainable application of corncob ash in composite materials are addressed. Overall, this study underscores the increasing critical role of corn cob ash in advancing sustainability in composite production
References
Adesanya, D. A. (1996). Evaluation of blended cement mortar, concrete, and stabilised earth made from ordinary Portland cement and corn cob ash. Construction and Building Materials, 10(6), 451–456. https://doi.org/10.1016/0950-0618(96)00001-3.
Ahmad, J., Zhou, Z., & Deifalla, A. F. (2023). Self-compacting concrete with partially substituted waste marble: A review. International Journal of Concrete Structures and Materials, 17, 25. https://doi.org/10.1186/s40069-023-00585-5
Ali, A., Bahadar, A., Khan, A., & Sanaullah, K. (2022). Role of agricultural waste in recycled plastic biocomposites. In M. R. Rahman & M. K. B. Bakri (Eds.), Recycled plastic biocomposites (pp. 165–194). Woodhead Publishing. https://doi.org/10.1016/B978-0-323-88653-6.00002-X
Andrew, J. J., & Dhakal, H. N. (2022). Sustainable biobased composites for advanced applications: Recent trends and future opportunities – A critical review. Composites Part C: Open Access, 7, 100220. https://doi.org/10.1016/j.jcomc.2022.100220
Anukam, A. I., Goso, B. P., Okoh, O. O., & Mamphweli, S. N. (2017). Studies on characterisation of corn cob for application in a gasification process for energy production. Journal of Chemistry, 2017, 1–9. https://doi.org/10.1155/2017/6478389
Arpitha, G. R., Jain, N., & Verma, A. (2023). Banana biofiber and glass fibre reinforced hybrid composite for lightweight structural applications: Mechanical, thermal, and microstructural characterisation. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-023-04300-y
Bala, S., Garg, D., Sridhar, K., Inbaraj, B. S., Singh, R., Kamma, S., Tripathi, M., & Sharma, M. (2023). Transformation of agro-waste into value-added bioproducts and bioactive compounds: Micro/Nano formulations and application in the agri-food-pharma sector. Bioengineering (Basel, Switzerland), 10(2), 152. https://doi.org/10.3390/bioengineering10020152
Bheel, N., Ali, M. O. A., Liu, Y., Tafsirojjaman, T., Awoyera, P., Sor, N. H., & Bendezu Romero, L. M. (2021). Utilisation of corn cob ash as fine aggregate and ground granulated blast furnace slag as cementitious material in concrete. Buildings, 11(9), 422. https://doi.org/10.3390/buildings11090422
Bhong, M., Khan, T. K. H., Devade, K., Krishna, B. V., Sura, S., Eftikhaar, H. K., Thethi, H. P., & Gupta, N. (2023). Review of composite materials and applications. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.10.026
Chen, B., Wang, M., & Manzano, H. (2025). Molecular elucidation of cement hydration inhibition by silane coupling agents. Nature Communications, 16, 1597. https://doi.org/10.1038/s41467-025-56877-9
Egbo, M. K. (2021). A fundamental review of composite materials and some of their applications in biomedical engineering. Journal of King Saud University - Engineering Sciences, 33(8), 557–568. https://doi.org/10.1016/j.jksues.2020.07.007
Fatile, O. B., Akinruli, J. I., & Amori, A. (2014). Microstructure and mechanical behaviour of stir-cast Al-Mg-Si alloy matrix hybrid composite reinforced with corn cob ash and silicon carbide. International Journal of Engineering and Technology Innovation, 4, 251–259. Retrieved from https://api.semanticscholar.org/CorpusID:62796149
Fonts, I., Juan, A., Gea, G., Murillo, M. B., & Sánchez, J. L. (2023). Environmental assessment of sewage sludge pyrolysis and its comparison with incineration: A cradle-to-grave approach. Journal of Materials Science & Technology, 142, 208–219. https://doi.org/10.1016/j.jmst.2022.09.035
Gowda, T., Nagaraju, S. B., Puttegowda, M., Verma, A., Rangappa, S. M., & Siengchin, S. (2023). Biopolymer-based composites: An eco-friendly alternative from agricultural waste biomass. Journal of Composites Science, 7(6), 242. https://doi.org/10.3390/jcs7060242
Ighalo, J. O., Adeniyi, A. G., Owolabi, O. O., & Abdulkareem, S. A. (2021). Moisture absorption, thermal, and microstructural properties of polymer composites developed from rice husk and polystyrene wastes. International Journal of Sustainable Engineering, 14(5), 1049–1058. https://doi.org/10.1080/19397038.2021.1892234
Kamarudin, N. H., Harun, Z., Othman, M. H. D., Hubadillah, S. K., Jamaluddin, M. R., & Yusof, K. N. (2018). Preliminary characterisation of corn cob ash as an alternative material for ceramic hollow fiber membrane (CHFM/CCA). International Journal of Engineering, 31(8), 1389–1397.
Kim, J. H., & Jun, Y. (2020). Decrease in viscosity caused by agglomeration and particle dispersion in cement–fly ash suspensions. Transportation Research Record: Journal of the Transportation Research Board, 2675(9), 73–80. https://doi.org/10.1177/0361198120940678
Kurien, D. P., Selvaraj, S., Sekar, M., Koshy, C. P., Paul, C., Palanisamy, S., Santulli, C., & Kumar, P. (2023). A comprehensive review of the mechanical, physical, and thermal properties of abaca fibre for their introduction into structural polymer composites. Cellulose, 30(14), 8643–8664. https://doi.org/10.1007/s10570-023-05441-z
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022). Sustainable fiber‐reinforced composites: A review. Advanced Sustainable Systems, 6(9), 2200258. https://doi.org/10.1002/adsu.202200258
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022). Sustainable fiber‐reinforced composites: A review. Advanced Sustainable Systems, 6(9), 2200258.
Maraveas, C. (2020). Production of sustainable construction materials using agro-wastes. Materials, 13(2), 262. https://doi.org/10.3390/ma13020262
Memon, F., Ali, K., & Hussain, R. (2019). Thermal and chemical analysis of corn cob ash for composite applications. International Journal of Environmental Studies, 76(2), 234–250.
Messahel, B., Onyenokporo, N., Takyie, E., Beizaee, A., & Oyinlola, M. (2023). Upcycling agricultural and plastic waste for sustainable construction: A review. Environmental Technology Reviews, 12(1), 37–59. https://doi.org/10.1080/21622515.2023.2169642
Mestry, O., Patil, S., Padwale, N., Mulik, A., Kumar, S., Deshmukh, S., & Shrivastava, R. (2022). Investigation into tribological performance of corn cob ash reinforced epoxy composites using RSM-based TLBO algorithm. Materials Today: Proceedings, 60, 2076–2083. https://doi.org/10.1016/j.matpr.2022.01.305
Mohanty, A. K., Vivekanandhan, S., Pin, J. M., & Misra, M. (2018). Composites from renewable and sustainable resources: Challenges and innovations. Science, 362(6414), 536–542. https://doi.org/10.1126/science.aat9072
Murthi, P., Poongodi, K., & Gobinath, R. (2020). Effects of corn cob ash as a mineral admixture on mechanical and durability properties of concrete – A review. IOP Conference Series: Materials Science and Engineering, 1006(1), 012027. https://doi.org/10.1088/1757-899X/1006/1/012027
Nzelu, C., Taiwo, O. O., Nwoye, C. I., Ojukwu, P., & Nwambu, C. (2025). A study on the mechanical behaviour of epoxy reinforced with corn cob ash composites for sustainable applications. UNIZIK Journal of Engineering and Applied Sciences, 4(1), 1–6.
Odoni, B. U., Edoziuno, F. O., Nwaeju, C. C., & Akaluzia, R. O. (2020). Experimental analysis, predictive modelling, and optimisation of some physical and mechanical properties of aluminium 6063 alloy-based composites reinforced with corn cob ash. DOAJ: Directory of Open Access Journals. https://doaj.org/article/56b72b2bc4174e7a920e8b2041bc6dc0
Okoronkwo, E. A., Imoisili, P. E., & Olusunle, S. O. O. (2013). Extraction and characterisation of amorphous silica from corn cob ash by sol-gel method. Chemistry and Material Research, 3(4), 68–72.
Oladele, I. O., Olayinka, M. O., Adelani, S. O., & Borode, J. O. (2022). Development of coconut fiber-corn cub ash hybrid reinforced polyvinyl chloride composites for shoe sole application. Journal of Natural Fibers, 19(15), 11763–11776. https://doi.org/10.1080/15440478.2022.2044426
Olafusi, O. S., Kupolati, W. K., Sadiku, E. R., Snyman, J., & Ndambuki, J. M. (2018). Characterisation of corncob ash (CCA) as a pozzolanic material. International Journal of Civil Engineering and Technology, 9(12), 1016–1024. Retrieved from http://www.iaeme.com/IJCIET/issues.asp?JType=IJCIET&VType=9&IType=12
Oyebisi, S. O., Olutoge, F. A., Ofuyatan, O. M., & Abioye, A. A. (2017). Effect of corncob ash blended cement on the properties of lateritic interlocking blocks. Progress in Industrial Ecology, an International Journal, 11(4), 373–387.
Oyewole, O. M., Adeyemi, A. G., & Ojo, S. O. (2023). Harnessing agricultural waste for sustainable biodiesel production. Preprints, 2023, 2023060642.
Paduvilan, J. K., Velayudhan, P., Amanulla, A., Maria, H. J., Saiter-Fourcin, A., & Thomas, S. (2021). Assessment of graphene oxide and nano clay-based hybrid filler in chlorobutyl-natural rubber blend for advanced gas barrier applications. Nanomaterials, 11(5), 1098. https://doi.org/10.3390/nano11051098
Phiri, R., Rangappa, S. M., Siengchin, S., Oladijo, O. P., & Dhakal, H. N. (2023). Development of sustainable biopolymer-based composites for lightweight applications from agricultural waste biomass: A review. Advanced Industrial and Engineering Polymer Research, 6, 436–450.
Rahman, M. A., Karunarathna, M. S., Bowland, C. C., Yang, G., Gainaru, C., Li, B., Kim, S., Chawla, V., Ghezawi, N., Meyer, H. M. III, Naskar, A. K., Penumadu, D., Sokolov, A. P., & Saito, T. (2023). Tough and recyclable carbon-fibre composites with exceptional interfacial adhesion via a tailored trimer-fibre interface. Cell Reports Physical Science, 4(12), 101695. https://doi.org/10.1016/j.xcrp.2023.101695
Sadhu, K. K., Mandal, N., & Sahoo, R. R. (2023). SiC/graphene reinforced aluminium metal matrix composites prepared by powder metallurgy: A review. Journal of Manufacturing Processes, 91, 10–43. https://doi.org/10.1016/j.jmapro.2023.02.026
Sam, M., Radhika, N., Sidvilash, V., & Mohanraj, T. (2022). Investigation on the mechanical and wear behaviour of AL-6082-BN-B4C-corn cob ash hybrid composites. Tribology in Industry, 44(1), 294–309. https://doi.org/10.24874/ti.1165.08.21.11
Sathiparan, N. (2025). A systematic review of corncob ash in construction: Current findings and future directions. Sustainable Materials and Technologies, 43, e01315. https://doi.org/10.1016/j.susmat.2025.e01315
Shahbandeh, M. (2025). Corn production worldwide 2014/15-2024/25. Statista. Retrieved March 22, 2025, from https://www.statista.com/statistics/1156213/global-corn-production/
Sharma, N., Alam, S. N., Ray, B. C., Yadav, S., & Biswas, K. (2018). Wear behaviour of silica- and alumina-based nanocomposites reinforced with multi-walled carbon nanotubes and graphene nanoplatelets. Wear, 418–419, 290–304. https://doi.org/10.1016/j.wear.2018.10.008
Suwanmaneechot, P., Nochaiya, T., & Julphunthong, P. (2015). Improvement, characterisation, and use of waste corn cob ash in cement-based materials. IOP Conference Series: Materials Science and Engineering, 103(1), 012023. https://doi.org/10.1088/1757-899X/103/1/012023.
Swami, P. V., & Raka, V. B. (2023). Exploration into tribological behaviour of graphite reinforced corn cob ash epoxy composites utilising Taguchi approach. In Springer eBooks (pp. 575–584). https://doi.org/10.1007/978-3-031-34644-6_59.
Vigneswari, S., Kee, S. H., Hazwan, M. H., Ganeson, K., Tamilselvan, K., Bhubalan, K., Amirul, A.-A., & Ramakrishna, S. (2024). Turning agricultural waste streams into biodegradable plastic: A step forward into adopting sustainable carbon neutrality. Journal of Environmental Chemical Engineering, 12(2), 112135. https://doi.org/10.1016/j.jece.2024.112135.
Vigneswari, S., Kee, S. H., Hazwan, M. H., Ganeson, K., Tamilselvan, K., Bhubalan, K., Amirul, A.-A., & Ramakrishna, S. (2024). Turning agricultural waste streams into biodegradable plastic: A step forward into adopting sustainable carbon neutrality. Journal of Environmental Chemical Engineering, 12(2), 112135. https://doi.org/10.1016/j.jece.2024.112135.
Zhang, W., Ji, X.-X., & Ma, M.-G. (2023). Emerging MXene/cellulose composites: Design strategies and diverse applications. Chemical Engineering Journal, 458, 141402. https://doi.org/10.1016/j.cej.2023.141402.
3.png)
1.png)
1.png)
