Temperature and humidity data acquisition design based on microcontroller ATMEGA8

Authors

  • Sirajuddin Abbas
  • Samsul Hidayat
  • Nugroho Adi Pramono

DOI:

https://doi.org/10.17977/um067v1i8p612–617

Keywords:

Atmega8, DHT11, LCD, data logger, temperature, Humadity, asm language, serial peripheral interface

Abstract

The need for fast and accurate information is urgently needed to support human performance in various areas, including in the field of meteorology. Information about the weather parameters such as temperature and relative humidity on certain areas need to know quickly and accurately. For example the recording of temperature and humidity of a city, the mountains, or in disaster areas, it will definitely be easier if can be recorded automatically and continuously in a certain time. Therefore it needs a tool that can find out the weather parameters such as temperature and relative humidity on a certain position continuously and automatically. In this case the system can use data acquisition and data logger.

System design used in this study consisted of DHT11 temperature and humidity sensor with digital output that is already terkalibrasi, microcontroller ATmega8 as the data processor of the DHT11 and the results will be displayed in the LCD. the display on the LCD always updated every 3 seconds.

The results showed that "Temperature And Humidity Data Acquisition Design Based On Microcontroller ATmega8" Media has successfully created according to the specifications of the tool are expected.

References

Atmel Corporation. (2013). 8-bit Atmel with 8KBytes InSystem Programmable Flash [Data set]. http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2486-8-bit-AVR-microcontroller-ATmega8_L_datasheet.pdf

Kristiyanto, D. D. (2009). Desain peralatan akuisisi data GPS berbasis kontroler AT89S51.

Purnama, I. (2011). Rancang Bangun Alat Pengukuran Laju Kendaraan Berbasis Mikrokontroler ATMEGA 8 (Doctoral dissertation, Universitas Komputer Indonesia).

Sarah, A. (2011). Perancangan sistem akuisisi data suhu dan kelembaban tersinkronisasi GPS menggunakan mikrokontroler H8/3069F.

Sunrom Technologies. ( 2012). DHT11 - Humidity and Temperature Sensor [Data set]. https://robocraft.ru/files/datasheet/DHT11.pdf

Susanto, H., Pramana, R., & Mujahidin, M. (2013). Perancangan Sistem Telemetri Wireless untuk Mengukur Suhu dan Kelembaban Berbasis Arduino Uno R3 ATmega328p dan XBee Pro. Universitas Maritim Raja Ali Tanjung Pinang.

Syahrul, P. M. A. (2014). Bahasa Assembly dan C. Bandung: Informatika Bandung, 348.

Tim IE. (2012). Pemantauan Suhu dan Kelembaban Relatif Berbasis DT-AVR Low Cost Micro System dan Modul Sensor DHT11. (Application Note), http://www.innovativeelectronics.com/files/an_files/ AN198_rev.pdf

Downloads

Published

11-01-2022

How to Cite

Abbas, S. ., Hidayat, S. ., & Adi Pramono, N. (2022). Temperature and humidity data acquisition design based on microcontroller ATMEGA8. Jurnal MIPA Dan Pembelajarannya (JMIPAP), 1(8), 612–617. https://doi.org/10.17977/um067v1i8p612–617

Issue

Section

Articles